Top! Adjustable Pulse Battery Spot Welder Welding Soldering Machine 3kW Durable

Description

Note: Battery pack is not included.
This product is suitable for mobile power. For example, laptop battery, digital camera battery pack, electric tool battery pack modification and repair. Supports lithium batteries and other cylindrical or polymer batteries, stainless steel sheets, nickel-plated steel sheets and other welding. 3KW high power, suitable for weldments within 0.15mm.
Upgraded version of JD-IIS, with extended bracket type, extended welding distance, and precise spot welding with foot switch.
Function parameter:
Input power: AC110V
Output power: 3KW
Welding current: adjustable between 01-99%
Pulse adjustment: 01-06 adjustable
Delay adjustment: 01-99 adjustable
Size: 183 * 164 * 130mm / 7.21''x6.47''x5.13''
Suitable for weldments of ≤0.15MM.
Safe use and maintenance:
1. The two electrodes and soldering pins should not be touched together to avoid short circuit;
2. Test welding must be tested on the weldment, try to avoid triggering the switch without the weldment;
3, when testing the welding, the current and pulse should be adjusted from small to large;
4. Keep it clean. After working for a period of time, you need to grind the needle to remove impurities and continue to use it.
5. The machine power should be plugged into the power supply socket, not plugged into the secondary power socket.
Note:  Please match the air switch above 30A to prevent tripping.
The package includes:
1* battery spot welder
1* clamp fixture
1* hex wrench
3* soldering pin
2* insurance tube
100- 0.1 * 4*100 nickel plate
Relationship between welding current and welding time
The welding current of JSD-II is set by the user, and the welding pulse is obtained by calculus from the program. The larger the welding current, the larger the welding pulse.
Specific steps
1. Check the electrode and soldering needle of the machine. Note that the two electrodes and the two solder pins do not touch together;
2, turn on the power (note that the power plug is inserted in a power supply socket such as a wall socket as much as possible), turn on the power switch, the power light is on, and the machine is turned on;
3. After entering the power-on state, adjust the “current” parameter according to the thickness of the weldment, and press “+” or “-”.
Key to set the required value, the program automatically saves the set value after shutdown;
Reference parameters:
0.1mm nickel-plated steel sheet: current around 20 starts to increase test
0.12mm nickel-plated steel sheet: current increases around 30
0.15mm nickel-plated steel sheet: current around 40 starts to increase test
The power conditions are different in different areas, and the reference parameters are only reference values, not fixed settings. The actual operation of the actual situation, generally from low to high adjustment test, can be welded to stabilize.
4, the weldment is flat, not to have a gap, align the welding pin to push up, trigger the switch (the copper pole of the nose is active, there is a micro switch at the back, must be pushed up when working, the back will Press the trigger switch), the work light flashes and the welding is completed.
On Jun-07-21 at 01:34:07 PDT, seller added the following information: