Mini Spot Welder Machine 18650 Battery Various Welding Power Supply US Ship

Description

Mini Spot Welder Machine 18650 Battery Various Welding Power Supply US Ship
100% brand new and high quality
Features:
1. Wide selection of welding power supply: lithium battery power supply or 12V car battery.
2. The controller is controlled by a single chip microcomputer, and the output pulse is accurate to ensure the welding quality.
3. With LCD display screen, can display welding parameters.
4. The welding pen and the input line are connected by U-shaped cold-pressed terminals, which is convenient for disassembly and replacement.
5. Using automatic touch welding mode, while retaining the manual trigger interface, you can choose according to your own use.
6. The power board uses 2 Gusi copper to increase the overcurrent capacity.
7, using 5 300A MOS tubes, non-disassembled MOS tubes.
8. The MOS tube driver adopts the imported special chip driver. The fastest MOS tube can be hit with 20nS. The switch is fast to prevent the explosion of the tube and the non-triode push-pull drive.
9. The MOS drive design adds a transient diode to protect the MOS and prevent the explosion of the tube.
10. 10AWG multi-filament flexible wire is used for the welding pen line and the input line to increase the overcurrent capacity.
11.The controller is mainly for welding nickel-plated steel strips from 0.1mm to 0.12mm.
12. A 25V10000uF high-frequency low-resistance capacitor is added to the power input for energy compensation, which increases welding stability.
Spot Welding Machine Set only,other accessories demo in the picture is not included.
Instructions for use:
1: Power connection
The controller comes with a 20cm long 10AWG input wire. One end has been crimped with a U-shaped terminal, and the other end has not been processed. Connect the crimped U-shaped terminal to the control power input terminal, and the other end is processed according to its own power supply. Do not connect the negative electrode wrong.
2: Switch on and off
There is a power switch under the control board. After pressing, wait for 3 seconds. After the buzzer drops, the LCD lights up and the boot is complete. Press the power switch again to shut down.
3: Screen description and parameter adjustment.
4: Welding
Keep the welding pin clean. If the welding pin is polished into a round head, the welding effect can be improved. There are manual and automatic methods.
Instructions for battery:
According to actual test, welding 0.1 to 0.12mm thickness of nickel-plated steel strip requires a working current of 120 to 180A. If the battery cannot output current in this range, the welding will fail.
Recommended battery capacity:
1: 12V car battery from 25 to 40ah, requires good performance and small internal resistance
2: 4000 to 6000mAh 45C to 60C 3S aircraft model lithium battery
3:30 to 35ah 12V capacity lithium battery pack
Specification:
Material: Metal
Input line length: app.20cm/7.87in
Length of welding pen: app.30cm/11.81in
Color: Red+Blue+Black
Battery: 18650 lithium battery(not included)
Quantity: 1Set
Note:
No retail package.
Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you buy.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Contents:
1Pc x Controller
2Pcs x Welding pen
2Pcs x Power input line (Red and Blue)
Shipping Information
ALL ORDERS WILL BE PROCESSED WITHIN 1 BUSINESS DAY.
** Please be advised that we cannot guarantee exact delivery date. It may vary depending on your local customs/local post office regulations. Import duties, taxes and charges are not included on the item price or shipping charges. These charges are buyer's responsibility. Kindly contact us if you require any further assistance and we'll be glad to assist you.**
Payment
Payments are accepted via PayPal only.
Terms & Return Policy
Change Address
— Orders are being processed within 1 business day. If you request to change your address, please let us know ahead of time. Otherwise, your order will be shipped to the address that you provided in your eBay/PayPal Record.
Cancelled Transactions
— We can cancel transactions, just let us know so we can process it immediately. We might provide an RMA number or further instructions if in case the item was already shipped.
Received Wrong Item/Not as Described
— We're humans and we intermittently commit mistakes but we are keen to correct them,  in a way that the buyer prefers. If the item received was wrong or not the same as shown in the product listing, we will require you to send actual photo/s of the item received along with its packaging (showing the label on the package). This is our SOP, for us to be certain and for record purposes.
DOA / Damaged on Arrival
— We make sure our items are properly packaged before shipping to avoid damages on the item. In case you received a damaged item, which might have been caused during shipping, please provide us photos of the item received along with its packaging (showing the label on the package) for us to check and report immediately to our Shipping Department so we can take necessary action.
Defective/Incompatible
— We get our items in bulk so there is a little chance that some would be defective. We might require you to send us photo/s of the item received and also your original item so we can compare and conduct necessary actions. If you feel like you need to return an item, please let us know the REASON so that we can provide an RMA Number if needed.