DC 12V Spot Welder Machine Circuit Board 18650 Battery Energy Storage for DIY

Description

Home
Category 1
Category 2
About Us
Store Categories
Business & Industrial
Consumer Electronics
Home & Garden
DC 12V Spot Welder Machine Circuit Board 18650 Battery Energy Storage for DIY
Item Detail:
The circuit board of this spot welder can be used to weld 18650/26650/32650 lithium batteries. Advantages: convenient
Carry, stable, reliable and durable. Low cost, own car start battery, or high-power battery pack, connect it
Ready to use! Save production cost!
Users need to bring their own 12V battery for power supply, and the welding current is about 90A~130A. For common
0.1mm~0.12mm nickel plated sheet welding is easy. Please make sure your battery can have more than 90A
Current, otherwise it will not be possible to weld!
Power supply voltage: 12V-15V
Working current: 90-150A (discharge below 90A, it will not work.)
A battery with a large discharge current will directly affect the welding effect. The following batteries are recommended:
20-45ah lead-acid battery with good performance and small internal resistance (internal resistance is less than 10 milliohms, and the discharge current is greater than
90A), such as starting the battery in a new car!
3.5-5.5ah45C 3S model airplane lithium battery pack
30-35ah capacity 18650 battery pack
Power requirements:
Spot welding is welded by the principle of rapid local heating and cooling by high current,
Need sufficient current supply, generally used 0.1-0.15 nickel plated sheet welding current
About 90-150A, so the working power of the circuit board must be greater than or equal to 150A.
The following battery packs can be used as working power
12V car starter power, 3S high-rate battery pack for model airplane, three-string high-rate lithium battery pack,
Hitachi 409003 string battery pack, lead-acid battery with good performance above 12V20A.
Calculation formula: capacity X discharge rate = load capacity
Take 4000ma aeromodelling battery as an example, the discharge rate is 45C (4AX45C=180A)
Instructions for use
Function buttons: 1, used to switch the machine, 2 used to switch gears!
When the power is turned on, the default is the first gear. Press the button for 2 seconds and release it.
The gear is increased by one gear, and the buzzer sounds and the LED flashes corresponding to the number of gears.
For example: the 3rd gear, the buzzer beeps three times, the LED flashes 3 times, a total of 5 gears. Spot welding strength from gear 1 to gear 5
Degree gradually strengthened
The 5th gear is the strongest!
After the 5th gear, press and hold the button again. It will power off. In the off state, press and hold the button to power on at the same time.
Back to first gear
Package include:
1 Set Energy Storage Spot Welder Machine DIY Kit
Shipping
Payment
Return Policy
Shipping
1,We will arrange shipping for you within 24 Hours after payment cleared except the holidays.
2,We only ship to the confirmed address provided by PayPal. Before you pay, please make sure your address in PayPal matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
3,we will ship out the order in 1-2 business days after payment cleared .Since it is international shipping ,delivery time is about 15--28 business days to arrive to most countries.
4,We ship items to Worldwide. Thank you!
Payment
We accept PayPal payment ONLY.
If
you  do not have Paypal account, please registered with (http://www.paypal.com)  Payment must be received within 5 days after auctions ended. Please do not  bid if you are not intending to buy. Unpaid dispute will be filed to ebay  for the non payable bidders.
Return Policy
We  are not responsible for custom duty or import  tax.
We will leave POSITIVE FEEDBACK  after receiving the payment. Please contact us if  your are  not satisfied with the item after receive  it.
We could offer  refund,  and refund request is available only requests  within  a week after parcel received & returning the  item as  the same condition as received.
We offer 100% refund if the item is broken before  arrival
,  all you need to do is sending us the clear  pictures  to show it is broken. Defective situation must be  noticed within 7 days after delivery.
All emails will be answered within  1  business day. If you do not receive our reply,  please kindly re-sent your email,and we will reply  to you as soon as possible.
All items sold by us  are being described to the best of our abilities, as  accurate as possible, and with utmost  conscientiousness on our part.However, to avoid any  potential oversights, I respectfully request your  assistance in helping us to make this a mutually  satisfactory transaction by Thoroughly reviewing  item description and photos, and asking all  questions Prior To Bidding.
Please Note that size  and color representation are subject to  manufacturing variance and may not be exact. Also  note that monitor settings may vary from computer to  computer and may distort actual colors. Please read  these terms thoroughly before placing your bid.