5000mAH Handheld Mini Lithium Battery Spot Welding Machine Butt Welding Machine

Description

Welcome to memolines, happy shopping！
Shop Homepage
New product
Feedback
About us
1. Introduction
This product is suitable for daily or small spot welding/butt welding work in the family. It is automatically triggered without a switch, and the operation is convenient and quick.
2. Parameters
Battery capacity: 5AH
Output voltage: 4.2V max
Output current: maximum 500A
Design current: maximum 1000A
Input parameters: 5V/2.1A
Support welding: 0.1-0.2 nickel sheet, iron sheet, stainless steel
Welding time: several milliseconds
Charging voltage: 4.5~5.5V (current≥2.5A)
Product size: 150*80*22MM
Shell material: hard aluminum alloy
Weight: a set of 467g
3. Features
⑴Small size
⑵Simple operation
⑶ Hard appearance
⑷Easy to use
⑸Super current
4. Components introduction
5. How to use
Power on
Click button 6
Shut down
Double-click the button6；
Automatically shut down after three minutes of standby
Gear position adjustment
Button 7 is gear position adjustment, click to change gears, the cycle is first gear>second gear>third gear>fourth gear>standby
Standby
After the fourth gear, click to enter the standby state;
It enters the standby state without spot welding for more than 30 minutes.
Spot welding
After turning on the machine, select the required gear and touch the welding object with the welding pen to spot welding.
Precautions for spot welding
a. Please fix the spot welding items in the spot welding mode;
b. Please keep the welding objects in a flat state;
3. Keep cooling time about 10S after welding
6. Matters needing attention
⑴It can be operated while charging, and it will enter standby mode when charging
⑵It is recommended to charge it once half a year when it is not used for a long time, and the charge is 75%
⑶ Continuous use of the soldering pen will cause hotness, it is recommended to wear gloves to operate
⑷Do not drop, flood, heat and other harmful operations to electronics
⑸The blackening of the tip of the soldering pen will affect the effect, which can be worn off with sandpaper
⑹If the spot welding is too long or the shutdown is caused by good contact, just restart it
Package Included:
1 * Hand-held desktop mini portable spot welder
Payment Mathod
Returns Policy
Feedback
Payment Mathod
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Ple
Returns Policy
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication
Feedback
When you satisfied with our product and services please leave us positive feedback.
If a problem occurs, contact us immediately with any email request. Just contact us using the " Ask the seller a question" link on eBay.We will maill bakc within 24hours
Welcome to memolines, happy shopping！
Best Match
Shop Homepage
New product
Feedback
About us
LCR-TC1 Transistor Tester
ESP32-CAM
MG996R Metal Gear
TL866II Plus
Electronic Load Tester
Voltmeter Ammeter
New product
1013D Oscilloscope
MLA-30+receiving antenna
CO2/TVOC/HCHO Gas Analyzer
Analog voltage and current signal generator
SI4732 Full Band Radio Receiver
Electric Welding Machine
Transistor tester
1. Introduction
This product is suitable for daily or small spot welding/butt welding work in the family. It is automatically triggered without a switch, and the operation is convenient and quick.
2. Parameters
Battery capacity: 5AH
Output voltage: 4.2V max
Output current: maximum 500A
Design current: maximum 1000A
Input parameters: 5V/2.1A
Support welding: 0.1-0.2 nickel sheet, iron sheet, stainless steel
Welding time: several milliseconds
Charging voltage: 4.5~5.5V (current≥2.5A)
Product size: 150*80*22MM
Shell material: hard aluminum alloy
Weight: a set of 467g
3. Features
⑴Small size
⑵Simple operation
⑶ Hard appearance
⑷Easy to use
⑸Super current
4. Components introduction
5. How to use
Power on
Click button 6
Shut down
Double-click the button6；
Automatically shut down after three minutes of standby
Gear position adjustment
Button 7 is gear position adjustment, click to change gears, the cycle is first gear>second gear>third gear>fourth gear>standby
Standby
After the fourth gear, click to enter the standby state;
It enters the standby state without spot welding for more than 30 minutes.
Spot welding
After turning on the machine, select the required gear and touch the welding object with the welding pen to spot welding.
Precautions for spot welding
a. Please fix the spot welding items in the spot welding mode;
b. Please keep the welding objects in a flat state;
3. Keep cooling time about 10S after welding
6. Matters needing attention
⑴It can be operated while charging, and it will enter standby mode when charging
⑵It is recommended to charge it once half a year when it is not used for a long time, and the charge is 75%
⑶ Continuous use of the soldering pen will cause hotness, it is recommended to wear gloves to operate
⑷Do not drop, flood, heat and other harmful operations to electronics
⑸The blackening of the tip of the soldering pen will affect the effect, which can be worn off with sandpaper
⑹If the spot welding is too long or the shutdown is caused by good contact, just restart it
Package Included:
1 * Hand-held desktop mini portable spot welder
Payment Mathod
Returns Policy
Feedback
Payment Mathod
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Ple
Returns Policy
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication
Feedback
When you satisfied with our product and services please leave us positive feedback.
If a problem occurs, contact us immediately with any email request. Just contact us using the " Ask the seller a question" link on eBay.We will maill bakc within 24hours