1/8''-1/2'' T-handle Tapered Bridge Pin Hole Reamer Woodworker Cutting Tool

Description

Note: The color of the item may vary slightly due to photography and your own computer
Feature:
The reamer is 6 fluted with a T-Handle and comes with handle grips for extra leverage to help keep the holes round.
Made of hardened carbon steel and ground steel edge's.
This steel reamers has the properly tapers the holes for bridge pins or endpins.
Suitable for taper hole on the wood board,wood sink holes, chamfers, inverted taper.
Specification:
Material:45 # Steel
Color:Silver and Black
Usage: hinge taper, for use in wood sink holes, chamfers, back taper
Blade Diameter:1/8"" to 1/2"" (3-13mm)
Dimension: 1:10
Size:143 x 13mm/5.63 x 0.51""(L x Dia)
Weight:92g
Dealbestshop
Customer satisfaction is our pursuit
1/8''-1/2'' T-handle Tapered Bridge Pin Hole Reamer Woodworker Cutting Tool
Note: The color of the item may vary slightly due to photography and your own computer
Feature:
The reamer is 6 fluted with a T-Handle and comes with handle grips for extra leverage to help keep the holes round.
Made of hardened carbon steel and ground steel edge's.
This steel reamers has the properly tapers the holes for bridge pins or endpins.
Suitable for taper hole on the wood board,wood sink holes, chamfers, inverted taper.
Specification:
Material:45 # Steel
Color:Silver and Black
Usage: hinge taper, for use in wood sink holes, chamfers, back taper
Blade Diameter:1/8"" to 1/2"" (3-13mm)
Dimension: 1:10
Size:143 x 13mm/5.63 x 0.51""(L x Dia)
Weight:92g
Safety instructions:
1.Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed．
2.The bladed product is not use for people under 18 years.
3.The item is only use for industrial cutting/engraving, not hazardous article.
Package Include:
1 x 6 Fluted Bridge Pin Hole Reamer Tapered Woodworker Cutting Tool
Item Specifics
Brand
Unbranded
MPN
Unbranded3580
Payment
Notice:
1. Due to battery is embargoed in air transport, all of our items have not battery.
2. Buyer need to pay the duties by themselves.
Dealbestshop
Customer satisfaction is our pursuit
Shop Category
Store Home
Other
Hot Item
10pcs Hard Plastic 12-Position Wire Connector Barrier Terminal Strip Block 10A
USD 22.12
10pcs CNC Two Flute Spiral Bit 3.175x2x22mm Cutting Acrylic ABS
USD 10.96
100pcs Plastic Dispensing Blunt Needle Tapered Tip Blue 22Ga Glue Liquid
USD 6.40
10pcs 4 Position 15A 600V Barrier Dual Row Terminal Block/Strip with Cover
USD 14.13
10Pcs Synchronous Motor AC110-127V 5-6 r/min 50/60Hz CW/CCW 4W TYC-50 4KGF.CM
USD 57.89
1/8''-1/2'' T-handle Tapered Bridge Pin Hole Reamer Woodworker Cutting Tool
Note: The color of the item may vary slightly due to photography and your own computer
Feature:
The reamer is 6 fluted with a T-Handle and comes with handle grips for extra leverage to help keep the holes round.
Made of hardened carbon steel and ground steel edge's.
This steel reamers has the properly tapers the holes for bridge pins or endpins.
Suitable for taper hole on the wood board,wood sink holes, chamfers, inverted taper.
Specification:
Material:45 # Steel
Color:Silver and Black
Usage: hinge taper, for use in wood sink holes, chamfers, back taper
Blade Diameter:1/8"" to 1/2"" (3-13mm)
Dimension: 1:10
Size:143 x 13mm/5.63 x 0.51""(L x Dia)
Weight:92g
Safety instructions:
1.Razor blades permanently enclosed in a cartridge or housing with less than 2mm of blade exposed．
2.The bladed product is not use for people under 18 years.
3.The item is only use for industrial cutting/engraving, not hazardous article.
Package Include:
1 x 6 Fluted Bridge Pin Hole Reamer Tapered Woodworker Cutting Tool
Payment
Shipping
Returns
Customer Services
Notice:
1. Due to battery is embargoed in air transport, all of our items have not battery.
2. Buyer need to pay the duties by themselves.
Copyright of XXXX. All rights reserved.